Hi everyone I'm new to this forums and also new to jukeboxes, i have teach my self a little by reading around and i have found lots of the answers for my questions in this forum, so thank you! I hope this helps someone with the same issue. Looks like the pins had become weak over the years and were making bad connections. SO.5 trips to the same location to fix this thing. I rebooted and it has not had any issues since. I removed each wire and reformed the pins to push harder on the PCB pins. I went to the location and removed every single plug connector in the wiring harness one at a time. ARRGGG!!!! There is really nothing else to change except for the display and the wiring harness. After this, I felt certain that I had found bad contacts and replacing the switch was the problem. The old one had black tar looking gunk on the pins. Next I changed out the service switch assembly on the left side of the jukebox with a new one. I checked voltages at the CCC and title rack PCB. I replaced the power supply, CCC, keyboard, and title rack PCB. Out of desperation, I started changing parts from a working machine. The waitress told me the title pages moved by itself to the beginning and then would not move. Again, all the pages were turned to the beginning and would not move. I checked the two switches on top of the title rack and adjusted them. I removed the title rack and changed out the title rack motor. Went to location again and found all the pages turned to the same position and nothing would respond. I hung around but could not make it mess up again. I recycled power and the pages flipped and began working. I opened the door and tried the title page switch inside the cabinet. Upon arrival, I noticed all the pages had been turned to one side (#00-11) and the title page turn buttons had no response when pushed. The location called and told me the title pages would not turn. I have a Rowe CD-100C jukebox out on location that is eating my lunch.
0 kommentar(er)
